Charmglow Stainless Steel Owner's Manual download pdf (Page 13)

Location

When determining a suitable location take into account concerns such as exposure to wind,

proximity to traffic paths, and keeping gas supply lines as short as possible. Place the grill in well

ventilated areas. Never locate the grill in a building, garage, breezeway, shed or other such

enclosed areas. During heavy use, the grill will produce a lot of smoke. For your comfort, we

recommend a finished height for your grill base of 36 to 38 inches (91.4 to 96.5 cm) and a

minimum of 12 inches (30.5 cm) on either side of your grill.

Clearance

Non-Combustible Construction

A minimum of 6 inches (15.3 cm) clearance from the back of the sear burner to non-combustible

materials are required for the lid to open fully.

Ventilation

We recommend that adequate ventilation be incorporated into your built in grill base. Vents should

be placed on both sides of your grill base. The upper vent opening should be at least 20 square

inches (129 cm

) and located within 5 inches (12.7 cm) of the top edge of your grill base. The

lower vent opening should be at least 10 square inches (64.5 cm

) and located within 1 inch

(2.5 cm) or less from floor level of your grill base.

Placement Of The Grill

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY

BEFORE ASSEMBLING OR OPERATING YOUR SEAR BURNER.

No tools are required to assemble this

LP Gas Drop-In Sear Burner:

PARTS LIST:

1 Cooking Grill

1 Sear Burner Assembly

(Proof of purchase will be required.)

Inspect contents of the box to ensure all parts are

included and undamaged.

FOR MISSING PARTS, PLEASE CALL

CUSTOMER SERVICE AT 800-527-0717.

1 Battery

1 Grease Tray

ASSEMBLY INSTRUCTIONS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Charmglow Stainless Steel Owner's Manual Page 13